Call or Text: 815-718-3414


All Solid Poly Box

Our box features a 1/2″ thick High Density Solid Poly Floor and 3/4″ thick Solid Poly sides for easy cleaning and minimal freeze up. Also, less friction means less force needed to pull the load off. The hydraulic end gate and front panel are also lined with poly.

Front Belt Drive

The banded belt drive with QD sheaves was developed for drives subject to shock loads, pulsating loads, or extreme vibrations where single belts could flip over on the pulleys. A high strength tie band permanently joins the 3 belts to provide lateral rigidity. Built for the most extreme conditions. With the banded design they are always matched for a good fit. Less maintenance, long life, and quiet operation. The design also eliminates the need for a shear hub or slip clutch.

Heavy-Duty Gearboxes

Beaters are driven by a 90° bevel gearbox with a 1:1 Ratio.  The apron drive features an In-Line Parallel Shaft Gear Reducer with a 43.6:1 ratio. Very high efficiency and torque. No worm gear also means less heat and more durability, along with better seal & lube life. Both feature bevel and cylindrical forged gears made from the best material available today by the same manufacturer with a worldwide reputation.

Heavy-Duty Beaters

The large 28″ diameter main beater has a massive Ø2-7/16″ drive shaft with 3/8″ thick double gusseted beater paddles. The 19″ diameter top beater comes standard. It provides more uniform spreading and breaks up large chunks that may otherwise be carried over the main beater.

Wear-Resistant Tips & Paddles

Both beaters are equipped with replaceable 3/8″ thick AR400 steel tips / paddles. AR400 is an abrasion resistant (AR) quenched and tempered alloy steel that exhibits high abrasion resistance and hardness with a durable, impact-resistant surface.

35 Series CAT 6 80° CV PTO Drive Shaft

 The constant velocity universal joint allows smooth machine operation through a wide range of motion. The CV delivers constant power by self-canceling torque and speed fluctuations typically found in single cardan-type universal joints. The HP rating from this drive shaft gives you more than enough power for those tough loads.


Ø1-3/8″-21 Spline or Ø1-3/4″-20 Spline (1000 RPM)


Automatic Over-Running Clutch 

An automatic clutch built into the front PTO drive shaft offers a level of implement overload protection not possible with other types of clutches. The compact, efficient design disconnects the power source from the drivetrain when overload occurs, and does not reconnect until the speed is reduced to near-zero. During disengagement, the patented design does not allow or generate damaging torque spikes or heat. An audible clattering noise alerts the operator when it has disconnected. A built-in overrunning feature allows the beaters to coast to a stop when the PTO is disengaged.


Heavy-Duty Apron

 The 67P11 Positive Lock Chain is made of the highest quality construction for heavy duty work in farming and other industrial projects. The links of the chain are made of a one piece construction with no pins to bend, lock or shear.


​Slats are 1/4″ thick x 2-1/2″ width x 1-1/2″ height structural angle.

Optional Pintle Chain

A 667XH pintle chain is also an option. The open barrel design helps eliminate material buildup in the root of the sprockets and features smoother operation, uniform link wear, and greater resistance to fatigue.

Hydraulic Apron Drive

Hydraulic drive is standard with built-in overload relief protection. Provides variable unloading speeds to match load, ground speed, or application rate requirements. 

Available control options include standard tractor-operated flow control, a manual flow control valve with “twist hose”, or an electric flow control valve with a control box located in the tractor cab.

Optional Scale Kit

Keep track of how much you are spreading with an optional scale kit system by Digi-Star. The 5 point load cell system offers accurate weight readings to a variety of indicators.

Indicator Options

EZ400 (Click Here For Details)

EZ2810 (Click Here For Details)

NT460 Nutrient Tracker (Click Here For Details)

NT8000i Rate Controller (Click Here For Details)

Product Specs


CAPACITYStruck- 438 ft3*

Heaped- 598 ft3*

Old Rating- 750 Bushel

EMPTY WEIGHT11,220 lbs
APRON CHAINTwin #67P11 or

​667XH Pintle

​WHEEL HUBS(4x) 15000# Hubs
​TIRE SIZEStd- 1600R20

Used Military Tires

Opt- 600/55×26.5 Flotation Tires


​Top Beater- Ø19″


​0 ft/min – 12 ft/min

Skip to content